PSA-80 PRO
Unmatched Precision in the industry, Fastest Execution, Breeziest to Operate
Productivity gain
With non-stop operation, instant job starts,
and minimal operator input, the PSA-80 PRO
boosts sanding productivity by 3x to 4x over
manual setups.
Saving per year
The average cost of employing two full-time
sanding workers in the U.S.—based on
industry studies and labor reports.
Rework and waste cut by over 35%
Manual sanding leads to inconsistent results,
fatigue, and costly scrap. Automation ensures
uniform quality, cutting waste and rework
by over 35%
Not just fast. Not just flexible. This is next-level intelligence in action—built to read, react, and perfect every panel with zero guesswork. Every finish, every material, every time—flawless, without fail.
No configuration, no programming—just smart automation that adapts to every door, instantly.
No setup. No slowdown. Just pure productivity and perfect finish every time.
Your machine thinks ahead—calculating the most efficient path for every panel to get more done in less time.
With real-time force control and a dual-tool system, this machine adapts to every shape, switches tasks on the fly, and delivers flawless finishes.
Laser probing enables the sanding tool to remove even the smallest perimeter marks with sub-millimeter precision—down to 0.1 mm.
With Autonomous Calibration & Registration—No risky adjustments, no errors—just perfect pad alignment and flawless finishes, every time.
While one side finishes, the other begins—keeping production flowing without a single pause.
20 full minutes of hands-free production—freeing your team to focus on higher-value work.
Your team’s time is too valuable to stand and wait.
PROVEN PRODUCTIVITY
Over 500 doors sanded in 8 hours — that’s 750+ sq. ft. of flawless finishing, proven by productivity tests.
Leading companies don’t settle for anything less than the best—industry leaders choose the PSA-80 PRO for its superior sanding quality, higher output, and unmatched efficiency.
“That robot is replacing the work of at least two to three people”
Tamas Zsoldos
Owner
“This sander sands better and more consistently than any human sander I’ve ever had.”
John William Mooney
Owner
“Omnirobotic did an outstanding job on the install and training!”
Pete Hulst
Production Director
“It’s really easy and that’s the fun”
Luc Turcotte
Owner
“I was immediately impressed/surprised with the increased quality we achieved on day one.”
John William Mooney
Owner
From expert-level sanding patterns to customizable force and finish settings, every preset is just the beginning. The PSA-80 PRO adapts to your production, your materials, and your quality standards—with precision that’s always on point.
Designed for smooth, linear flow—great for hardwoods, but adjustable for any surface or finish that needs a consistent grain-following approach.
Engineered for uniform coverage—ideal for MDF, painted surfaces, and more. Customize speed, overlap, and pressure for your perfect result.
Master tight angles and putty removal—set your own tool access, pressure, and finish level for every internal detail.
Protect delicate edges from burn-through. Adjust sensitivity and contact to suit your coatings and corner profiles.
The PSA-80 PRO delivers reliable, production-ready sanding performance and surface quality that meet the highest industry standards.
Go from delivery to production—fast. Omnirobotic handles the entire onboarding process so you can focus on what matters: results. No complex commissioning. No wasted time.
Shipped in a compact 3-piece kit designed for smooth transport and fast, frictionless installation.
Our technician will install and fine-tune the PSA-80 PRO at your facility—optimized to your production needs. Most customers are fully operational the same day.
Enjoy one full year of expert remote support plus free software updates to keep your system at peak performance—no hidden fees, no surprise charges.
Every PSA-80 PRO comes with a 1-year warranty for total peace of mind. Each PSA-80 PRO is assembled and quality-tested by certified technicians at our Laval, Quebec facility, ensuring top performance from day one.
Want to see how the PSA-80 PRO can fit into your unique workflow? Contact us today to discuss your specific needs or schedule a personalized demo to witness the impact firsthand.
Director of Operations
Office: (450) 231-1077 ext. 101
Email: tania@omnirobotic.com
The PSA-80 PRO is designed for high throughput, capable of sanding between 300 and 500 panels in an 8-hour shift, depending on the panel size and finish required. For example, a 1.5-square-foot panel takes approximately 60 seconds, allowing for up to 480 panels per shift.
No specialized skills are required to operate the PSA-80 PRO. It features an intuitive interface that enables operators to start and monitor the sanding process with minimal training. Basic training is provided during installation, ensuring that any team member can operate the machine effortlessly
With superhuman precision, the PSA-80 PRO delivers precisionsanding to an accuracy of 0.1 mm across all panel surfaces, eliminating variations and reducing human error. This consistency results in high-quality finishes that meet or exceed industry standards, enhancing both product quality and customer satisfaction.
The PSA-80 PRO can sand a wide variety of flat panels, including hardwood, softwood, MDF, HDF, particleboard, and veneer. It supports various finishing stages, such as primer, sealer, stain preparation, and lacquer, providing a versatile solution to meet diverse production requirements.
No, the PSA-80 PRO is optimized to sand critical flat sections of panels, such as rails, stiles, mullions, and inner panels, with unmatched precision and consistency. It achieves an accuracy of up to 0.1 mm on these surfaces. For edges and decorative details, operators can sand manually using one of the provided tables, which are designed to support both the robot and manual sanding operations.
Yes, the PSA-80 PRO is specifically designed to sand rails, stiles, and inner panels with precision. It features the FC-40™ Dual Tool, which automatically switches tools to effectively sand intricate cavities, rails, and stiles, ensuring comprehensive coverage and a flawless finish.
The PSA-80 PRO can handle panels up to 160” x 36”.
The PSA-80 PRO can sand up to 500 doors in an 8-hour shift. For example, a standard 18” x 12” panel is completely sanded in less than 60 seconds.
Yes, the PSA-80 PRO utilizes advanced 3D cameras and lasers to automatically identify door panel and railing styles. This eliminates the need for manual input and ensures precise adjustments for each piece.
The PSA-80 PRO is equipped with advanced controls to ensure each panel receives optimal sanding treatment.
Key parameters include:
Adjustable Sanding Speed: Fine-tune sanding speed to within ±1 mm/s.
Adjustable Sanding Overlap: Control overlap precision to within ±1 mm for superior surface finish.
Custom Sanding Presets: Specific presets for different panel sections—Slab, Panel, Cavities, Raised Panel, and Rails & Stiles—ensuring consistency and accuracy.
Adjustable Force Compensator: Set sanding force for each head between 15 and 40 Newtons, for consistent sanding results beyond human capability.
Automatic Tool Selection: Automatically selects the best tool for each cavity, optimizing panel finishing.
Criss-Cross Pattern: Ideal for MDF and HDF doors, producing a flawless sanding toolpath.
Raster Pattern: Specifically suited for hardwood panels.
Ultra-Consistent Scratch Pattern: Perfectly prepares surfaces for staining.
Butterfly Corner Sanding: Tailored to sand external corners without burning through lacquer or primer, and ideal for internal corners to remove putty on five-piece doors.
With its advanced 3D vision and laser guidance system, the PSA-80 PRO automatically detects panel configurations and adjusts its sanding process without requiring user input. This ensures precision and consistency across different panel styles, including panels with rails, stiles, and mullions.
The PSA-80 PRO is a collaborative robot designed with safety and flexibility as core principles. It features 3D perception technology for collision prevention, ensuring safe interaction with operators and minimizing downtime caused by potential collisions. This capability keeps your production running smoothly while maintaining a high standard of operator safety.
Yes, by minimizing human error and optimizing the sanding process, the PSA-80 PRO reduces material waste associated with rework and inconsistencies. The machine’s precision leads to fewer discarded panels and overall material savings, which contribute to environmental sustainability.
We deliver across North America, and are happy to discuss delivery options for other locations. For inquiries about shipping outside of North America, please contact our team to explore available solutions.
Absolutely. The PSA-80 PRO is designed with adaptability in mind and can seamlessly integrate into a wide range of production environments. Its compact, modular design allows for efficient integration with current equipment configurations and can complement manual sanding stations if desired. Additionally, no external air duct is required—the PSA-80 PRO comes equipped with its own vacuum and dust extraction system for hassle-free installation.
Installation is straightforward and causes minimal disruption. A certified Omnirobotic technician will complete the setup on-site, typically within a single day, enabling your team to begin using the PSA-80 PRO quickly. The machine also features autonomous registration, eliminating the need for costly mechanical adjustments and ensuring precise alignment from the start.
Yes, training is provided during the installation process to ensure your team can operate the PSA-80 PRO with confidence. We recommend that the department manager or the person responsible for production be present during setup. This allows our Omnirobotic technician to tailor the machine settings to your specific production needs, ensuring seamless integration and optimal performance right from the start.
Omnirobotic provides ongoing support to ensure your PSA-80 PRO continues to perform optimally. Our support include troubleshooting, software updates, and remote assistance. You will also have access to our experienced customer service team for any operational questions. Remote support is complimentary during the first year of operation.
The PSA-80 PRO is designed for low-maintenance, high-efficiency operation. Routine maintenance involves simple tasks such as cleaning the sanding heads, inspecting vision sensors, and applying software updates. To ensure peak performance, we recommend an annual check-up by a certified Omnirobotic technician.
Sanding pad life varies with material type and frequency of use. Daily inspections and timely replacements are recommended for optimal quality. To optimize sanding pad usage, the PSA-80 PRO includes a media wear timer that maximizes efficiency, helping lower operating costs. Omnirobotic technicians can provide usage guidelines tailored to your application, ensuring reliable performance.
You’re invited to experience the PSA-80 PRO firsthand! Attend one of our North American demo events or request a free personalized demo at our facility. Bring your own doors and try it out yourself, or send us your doors to book a free virtual demo.
Stay informed on upcoming events and demos—subscribe to our newsletter, as units are in high demand!
You can order directly from Omnirobotic by calling (450) 231-1077 or emailing sales@omnirobotic.com. You may also order through our affiliated distributors across North America.
The PSA-80 PRO is offered with modular pricing, meaning the final cost depends on the configuration and features that best suit your operation. This flexible approach ensures you get exactly what you need—without paying for what you don’t.
For detailed pricing and financing options, we encourage you to contact our team directly at (450) 231-1077 or sales@omnirobotic.com. We’ll be happy to provide a personalized quote based on your unique requirements.
Flexible financing options are available to make the PSA-80 PRO accessible for businesses of various sizes. Contact us at (450) 231-1077 or use our contact form to learn more about tailored financing solutions.
Once the down payment is completed, it typically takes approximately 2 to 3 months to receive and install your PSA-80 PRO at your facility. This timeframe may vary based on several factors, including production schedules and shipping logistics. For a more precise delivery estimate, please contact our sales department directly by calling (450) 231-1077 or emailing sales@omnirobotic.com