How Smart Cabinet Shops Are Reclaiming Labor, Throughput, and Profits with the PSA-80 PRO
For years, automating sanding in cabinet manufacturing has felt out of reach.
Too expensive. Too complicated. Too rigid.
So shops kept doing what they always did: assigning valuable workers to hours of repetitive sanding, often just standing beside a machine, guiding it, babysitting it.
But what if there was a robot built specifically to solve that problem?
Not just to sand doors…
But to free up your people, reduce operating costs, and run productively all day with just a few minutes of operator attention?
That’s what the PSA-80 PRO was designed for.
Built to Finish, Not to Supervise
Most sanding machines still need an operator nearby at all times.
Not the PSA-80 PRO.
- Load the parts
- Press a button
- Walk away
It only needs about 10% of an operator’s time, meaning your team can stay productive while the robot handles the hard, boring stuff.
This is the heart of the PSA’s value:
It’s not about labor replacement, it’s about labor reallocation.
Minimize OPEX. Maximize Flow.
The PSA-80 PRO was built from the ground up to minimize operating costs:
- No dedicated operator per shift
- No costly rework from uneven sanding
- No complicated programming or part fixturing
- No complicated training
It’s not “another machine to watch.”
It’s a tool that runs independently, designed to keep doors moving through your shop, without eating up your payroll or your floor space.
Not Just ROI, Smart Ongoing Value
Of course, ROI matters. Most PSA customers see payback in under 24 months. But what matters even more is this: Every hour it runs, it costs you a fraction of what manual sanding does, and it delivers better finish quality, without wearing anyone down. That’s not just return on investment. That’s return on attention, return on time, return on team morale.
Final Thought:
You’re not just buying automation. You’re buying productivity.
With the PSA-80 PRO, you’re not tied to the machine. You’re freed up to run your shop.
Let’s talk numbers.
We’ll show you the real cost-per-shift and help you calculate how much time, and money, you could be saving. You can book a quick call with our team to review your shop’s number.
Or, contact Tania directly for personalized advice:
Tania Silva
Director of Operations
(450) 231-1077 ext. 101
tania@omnirobotic.com
